Rack and pinion hoist
Assembly and Operating Instructions
15 / 100 BL108 GB Edition 03.2018 Rev. 02
2.3 Safety instructions for transport
Immediately report transport damage and/or missing parts to the
supplier.
During transport work, wear a safety helmet, safety shoes and safety
gloves!
Never step under suspended loads!
Only use appropriate, standardised and tested lifting gear, forklifts,
cranes) and sling gear (round slings, lifting straps, sling ropes, chains)
for transport at the assembly site.
When selecting hoisting equipment, always take into account the
maximum suspended loads!
Please refer to the dimensions and weights in the technical
specifications section (3.4) and spatial requirements (3.5).
Only carefully load and transport equipment that has been
disassembled, packaged and lashed.
Always ensure that the machine is transported without being knocked
or jolted.
Observe the pictograms on the packaging.
Only attach gear to the designated sling points.
Always secure transported loads against falling or tipping over!
To Next Page
Loading...