Rack and pinion hoist
Assembly and Operating Instructions
59 / 100 BL108 GB Edition 03.2018 Rev. 02
6.4 Operating the hoist
The platform must be turned towards the trolley and latched into
place. The loading ramp must be closed.
• Rotate the main switch to the position “I”.
• Unlock the EMERGENCY STOP button (1)
on the manual control.
Load platform upwards
Push the UP button (2).
The load platform moves only as long as the
button UP (2) is pressed.
Load platform downwards
Push the DOWN button (3).
The load platform moves only as long as the
button DOWN (3) is pressed.
Switch off or stop
Release the button UP (2) or DOWN (3), in an emergency activate
the EMERGENCY STOP button (1).
To Next Page
Loading...