Rack and pinion hoist
Assembly and Operating Instructions
88 / 100 BL108 GB Edition 03.2018 Rev. 02
If the brake is released too much then the load platform will build up
an excessive speed and the safety gear will engage! If the safety gear
has engaged once, it will not be possible to progress any further
without raising the load platform or resetting the safety gear.
On reaching the foot section, make sure that the trolley with
platform does not hit the ground.
Release the brake release lever in time!
Action 4: Retrieval according to the emergency plan of the
operating company.
To Next Page
Loading...