Rack and pinion hoist
Assembly and Operating Instructions
18 / 100 BL108 GB Edition 03.2018 Rev. 02
If it is necessary to remove safety devices during servicing and
repairs, the safety devices must be installed and checked immediately
after completion of servicing and repair tasks!
Do not make any changes, additions or modifications to the machine.
This also applies to the installation and adjustment of safety devices
such as limit switches.
Immediately replace damaged or detached notices and warning signs,
as well as safety labels.
Ensure that auxiliary supplies, as well as replaced parts, are disposed
of safely and in an eco-friendly manner (also refer to Chapter 10)
The aforementioned safety measures apply equally for work in the
context of eliminating faults.
To Next Page
Loading...