GEFRAN-SIEI ARTDrive Vector V2 Series - Page 141

Index
MENUMENU
MENUMENU
MENU [Unit] Access Default Min/Max Format Reg.Mode Level Ipa
Parameter Name
Description
ARTDrive V2 series - Instruction Manual Chapter 6 Parameter • 141
C03.18 AI 3 offs tune / Start?
Autotune command for the Analog Input 3 offset. Input automatic fine-tuning.
To run the autotune, put the input signal to its minimum value and execute “Start ?”
command
C03.19 AI 3 gain tune / Start?
Autotune command for the Analog Input 3 gain.
Conditions containing an offset can be compensated. To run the autotune, put the input
signal to its maximum value and execute “Start ?” command.
C03.20 AI 3 output [cnt] R 0.00 -32768/32767 PV V-F-S-B Easy 5049
Analog Input 3 output count displaying.
C03.21 AI 3 < thr N/A R 0 0/1 DV V-F-S-B Full 5050
Display of threshold compensator state of Analog Input 3 (1 = the condition is true).
C03.22 AI 3 gain N/A RWS 1 -16/16 PP V-F-S-B Full 5045
Analog Input 3 gain count value displaying.
C04.00
C04.00 Exp AI enable N/A RWS 0 0/1 DV V-F-S-B Full 3900
It enables Expanded Analog Inputs:
[0] Disabled
[1] Enabled