GEFRAN-SIEI ARTDrive Vector V2 Series - Page 184

Index
MENUMENU
MENUMENU
MENU [Unit] Access Default Min/Max Format Reg.Mode Level Ipa
Parameter Name
Description
Chapter 6 Parameter • 184 ARTDrive V2 series - Instruction Manual
D08.11 Mlt spd 1 [rpm] RWS 0.00 Calc/Calc PV V-F-S-B Easy 7061
Digital Multi Speed 1 value
D08.12 Mlt spd 2 [rpm] RWS 0.00 Calc/Calc PV V-F-S-B Easy 7062
Multi Speed 2 value.
D08.13 Mlt spd 3 [rpm] RWS 0.00 Calc/Calc PV V-F-S-B Easy 7063
Multi Speed 3 value.
D08.14 Mlt spd 4 [rpm] RWS 0.00 Calc/Calc PV V-F-S-B Full 7064
Multi Speed 4 value.
D08.15 Mlt spd 5 [rpm] RWS 0.00 Calc/Calc PV V-F-S-B Full 7065
Multi Speed 5 value.
D08.16 Mlt spd 6 [rpm] RWS 0.00 Calc/Calc PV V-F-S-B Full 7066
Multi Speed 6 value.
D08.17 Mlt spd 7 [rpm] RWS 0.00 Calc/Calc PV V-F-S-B Full 7067
Multi Speed 7 value.
D08.20 Mlt spd 0 mon [rpm] R 0.00 0.00/0.00 PP V-F-S-B Easy 7068
It displays Multi speed 0 value.
D08.21 Mlt spd 1 mon [rpm] R 0.00 0.00/0.00 PP V-F-S-B Easy 7075
It displays Multi speed 1 value.
D08.22 Mlt spd sel mon N/A R 0 0/7 DP V-F-S-B Easy 7069
Active selection displaying (Multi speed 0, Multi speed 1, etc.).
D08.23 Mlt spd out [rpm] R 0.00 0.00/0.00 PV V-F-S-B Easy 7070
It displays Multi speed block output signal.