Go to Standby
Return to Standby mode.
All settings (gas, ventilation and alarm limits)
are unaltered, apart from agent concentration,
which is set to OFF.
Go to Standby and return to startup
configuration
Return to Standby and restore the system to
the startup configuration.
The startup configuration is set using
Menu/Service & Settings.
Save patient trends and clinical logs to USB
memory
Saves all patient trends and clinical logs to an
inserted USB memory device.
Delete patient trends and clinical logs
The data is deleted from working memory, but
can still be accessed from Menu/Service and
Settings.
When a patient case is completed and the
system is switched 'Standby', the vaporizer
is automatically set to 'OFF'.
8.5 Save screen
Saves a copy of the screen to a USB memory
device.
A USB memory device must first be inserted
and synchronized with the system. A system
message will appear when the device is ready
for use.
The user will be informed in the system
message area that a picture has been taken.
For the picture to be successfully saved, the
system must be left alone until the message
appears. The picture file will be given a unique
ID number.
158
FLOW-i 4.2, User's Manual
| 8
| Membrane buttons |
To Next Page
Loading...
Need help?
General
