Service and settings - Configuration
01-01 13 00
Displayed measurements
Used to select what measurements to display on
the screen, and where to display them. Note that
some positions are reserved for obligatory
measurements, e.g. MVe and RR.
01-01 13 00
Waveforms
Used to manage settings for waveforms, loops and
the rotameter.
Waveform 1 is always set to Pressure.
01-01 13 00
Alarm general
Used to specify the sound level between 20% and
100% of maximum volume (approx. 85 dB)
Checking 'APNEA mute' and 'HLM/CPB mode' will
make these available for activation in the alarm
profile window.
FLOW-i 4.2, User's Manual
175
| Membrane buttons |
8 |
To Next Page
Loading...
