Service and settings - Configuration
01-01 13 00
Ventilation and gas
Used to specify the startup ventilation and gas
configuration.
1. Begin by pressing the Start touch pad in the
Config: Startup window.
01-01 13 00
2. Select any of the available parameters and
toggle through available options using the
rotary knob. Continue by pressing Next.
• Patient range
• Infant age
• Infant, VT/PBW
• Adult age
• Adult, VT/PBW
• Volume setting
• Breath cycle setting
• Activate Insp./Exp. hold (option)
• PBW-based values used automatically
01-01 13 00
3. Press the ventilation mode touch pad and use
the rotary knob to select the desired mode.
Associated ventilation parameters become
available and can be changed. Continue by
pressing Next.
Pressing the Factory default touch pad will reset
the parameters to default values, including default
ventilation mode for each patient category.
178
FLOW-i 4.2, User's Manual
| 8
| Membrane buttons |
To Next Page
Loading...
