3.2.2 Navigating the screen
There are several ways of navigating the
screen and setting values.
Using the touch screen
1. Press the required touch pad. The touch
pad becomes active, which is indicated
by a blue highlight.
2. Turn the rotary knob to the required value.
3. Press the touch pad to confirm setting.
An activated touch pad is only active for 20
seconds. The system will prompt the user to
enter a value when 10 seconds have passed.
If no value is entered and confirmed within the
following 10 seconds, the touch pad setting
returns to its previous setting and is
deactivated.
Using the rotary knob
1. Turn the Rotary knob to move between
the touch pads on the screen. The
selected touch pad is indicated by a blue
frame.
2. On required touch pad, press the rotary
knob to activate the touch pad. This will
highlight the touch pad in blue.
3. Turn the Rotary knob to the required
value.
4. Press the Rotary knob to confirm setting.
22
FLOW-i 4.2, User's Manual
| 3
| System overview |
To Next Page
Loading...
