m908 User Manual, Rev. G
1. Fuse drawer: Contains (2) 5x20mm 800mA Time Delay fuse.
2. AC Power inlet: 90-240V~ 50W max. Connect to a grounded outlet.
3. DC Output connector: ALWAYS connect DC power cable to m908 before turning on power and
turn off the power before disconnecting the DC power cable!
4 Installation
4.1 Unboxing your m908
4.1.1 Open and inspect your box
Please take care when removing the m908 from its OEM packaging. Our packaging is
designed with ‘Korrvu©’ suspension inserts, which provide the best protection from the dubious
underworld of freight handling – so save your packaging material. Inner boxes will contain all
the items listed below. If you think you are missing anything, give your dealer or us a call and
we’ll get you taken care of right away.
4.1.2 Your box will contain
• 1pc Audio Control Unit (ACU)
• 1pc Remote Control Unit (RCU)
• 1pc Power Supply Unit (PSU)
• 1pc AC power cord
• 1pc DC power cord 8’ (2.8m) (Grace Part No. WA084)
Page 15 of 135 Table Of Contents
To Next Page
Loading...
