m908 User Manual, Rev. G
Inputs that are not operating at the sample sample rate can not be summed. Attempting to sum
inputs that are operating at different sample rates will cause the following message to appear:
Note that inputs that are at the same sample rate but are asynchronous will be summed but
there may be glitches due to clock drift.
Inputs that do not have identical Input sync delay settings can not be summed together. This is
because the delay happens after the input summing section in the m908. Attempting to sum
inputs with different sync delays will cause the following message to appear:
Page 25 of 135 Table Of Contents
To Next Page
Loading...