Grace m908 - Illustration 17: Direct Input Offset on Active Input; Illustration 18: Direct Input Offset on Inactive Input.27

m908 User Manual, Rev. G
the direct access input offset control input. Once engaged, the current input offset will be
displayed in place of the modified input's name. This mode remains active until the inptut button
is released or another input button is pressed simultaneously (which engages input summing
mode).
This feature is available for active inputs, inactive inputs and in summing mode. Changes
made to input offsets via the direct access mode will not be saved in the workflow unless Setup
mode is entered and then exited.
Page 27 of 135 Table Of Contents
Illustration 17: Direct Input Offset on active Input
Illustration 18: Direct Input Offset on inactive Input