2-9
5
Position the media and the push rollers to correspond with
the width of the media.
When using FC9000-75
Supplement
The media must always be positioned over
the media sensor.
See "Aligning the Push Rollers" for the
position of the push rollers.
See "Aligning the Push Rollers" for information
about push roller hold-down force.
The push rollers push down on either side of the media. Use
the grit roller position guide to make sure the push rollers are
set on top of the grit rollers.
<RXFDQDGMXVWWKHFHQWHUSXVKUROOHUVKROGGRZQIRUFH
Push roller
Push roller
Grit roller
Media
Media sensor
Grit roller position guide
To Next Page
Loading...
