GSE Scale Systems - 21
Chapter 4 Parameter Setup (Advanced) Technical Reference Manual
P
PARAMETER # SELECTION DESCRIPTION
P112.00 Ztapr OFF Set Zero Track Aperture
P112.01 0.1 d in terms of divisions
P112.02 0.2 d
P112.03 0.3 d
P112.04 0.4 d
P112.05 * 0.5 d
thru
P112.ºº 20.0d
P113.00 ZTdly 0.05s Set Zero Track TIme Delay in
seconds.
P113.01 0.1 s
P113.02 0.2 s
P113.03 0.3 s
P113.04 0.4 s
P113.05 0.5 s
P113.06 0.6 s
P113.07 0.7 s
P113.08 0.8 s
P113.09 0.9 s
P113.10 * 1.0 s
thru
P113.ºº 10.0s
P114.00 Mot'n OFF Define Motion in terms
of divisions.
P114.01 0.1 d
P114.02 0.2 d
P114.03 0.3 d
P114.04 0.4 d
P114.05 0.5 d
P114.06 0.6 d
P114.07 0.7 d
P114.08 0.8 d
P114.09 0.9 d
P114.10 * 1.0 d
thru
P114.ºº 20.0d
SECTION - 4.6
To Next Page
Loading...