EasyManua.ls Logo

GSE 574 - Page 45

Default Icon
339 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Model 574 Programmable Counting System (PCS)
26 - GSE Scale Systems
PARAMETER # SELECTION DESCRIPTION
Custom Units 2
P154.08 lb oz Sets the foruth units as
pounds-ounces
P154.09 * =NONE Disables the fourth units
P155.- -Ucon1 * 1.000 Enter the conversion factor
for the 1st Custom Units.
P156.- -Ucon2 * 1.000 Enter the conversion factor for
the 2nd Custom Units.
P157.- -Unam1 * ????1 Enter the name of the 1st
Custom Units.
P158.- -Unam2 * ????2 Enter the name of the 2nd
Custom Units.
MODEL TYPE, TARE
& ACCUMULATION
P160.00 Model * 574 Shows the System model type
P161.00 TrSAV * Disbl Select whether or not you want
to saveTare Weight on
power-down
P161.01 Enbld
P162.00 TrNEG * Disbl Select whether or not to be
able to tare out negative
numbers
P162.01 * Enbld
P163.00 TrRND Disbl Elect whether or not to round
off tare values.
P163.01 * Enbld
P164.00 AcRTZ 0.01% Enter how close the platform
must be to zero in
P164.01 0.02% terms of Full Scale in order to
perform an
P164.02 0.05% Accumulation
P164.03 * 0.1%
P164.04 0.2%
P164.12 100.%
P165.00 AcFnc BOTH Select whether to add,
subtract or be able to do
P165.01 * ADD do both when accumulating.
P165.02 SUB
KEY DISABLING
P166.00 AutoT Disbl Enable/disable use of auto-
tare operation

Table of Contents