GSE 574 - Page 50

GSE Scale Systems - 31
Chapter 4 Parameter Setup (Advanced) Technical Reference Manual
PARAMETER # SELECTION DESCRIPTION
SECTION - 4.6
4TH TRANSMIT
SELECTIONS
P240.00Send4 * off Determine when 4th Transmit
will be sent.
P240.01 onreq
P240.02 cont.
P240.03 wgmt
P240.04 onrq2
P241.00 Port * Comm Select port for 4th Transmit.
P241.01 Print
P242.00 Mot'n off Enable/disable motion delay
for 4th Transmit.
P242.01 * delay
NETWORKING
P250.00 NtWrk * Disbl Disable network capabilities.
P250.01 NtWrk TxTri Enable multi-drop RS-485.
P251.00 Addrs * 0 Select node address from 0-254.
thru
P251.— Addrs 254
REMOTE DISPLAY
P290.00 Echo * Disbl Disable transmitting 574 display to
remote device.
P290.01 Echo Comm Echo 574 display to remote device out
the comm port.
P290.02 Echo Prntr Echo 574 display to remote device out
the printer port.
P291.02 Echo * <STX> Transmit any ASCII character or
control code to remote device before
echoing 574 display.
P291.03 Echo * <ETX> Transmit any ASCII character or
control code to remote device after
echoing 574 display.