GSE 574 - Page 49

Model 574 Programmable Counting System (PCS)
30 - GSE Scale Systems
PARAMETER # SELECTION DESCRIPTION
1ST TRANSMIT
SELECTIONS
P210.00 Send1 off Disable the 1st Transmit
P210.01 * onreq Send the 1st Transmit on
request
P210.02 cont. Send the 1st Transmit
continuously
P210.03 wghmt Send the 1st Transmit after
each weighment
P211.00 Port Comm Select port for 1st
Transmit.
P211.01 * Print
P212.00 Mot'n off Enable/disable motion delay
for 1st Transmit
P212.01 * delay
2ND TRANSMIT
SELECTIONS
P220.00 Send2 * off Determine when 2nd Transmit
will be sent
P220.01 onreq
P220.02 cont
P220.03 wghmt
P220.04 onrq2
P221.00 Port * Comm Select port for 2nd Transmit.
P221.01 Print
P222.00 Mot'n off Enable/disable motion delay
for 2nd Transmit.
P222.01 * delay
3RD TRANSMIT
SELECTIONS
P230.00 Send3 * off Determine when 3rd Transmit
will be sent
P230.01 onreq
P230.02 cont
P230.03 wghmt
P230.04 onrq2
P231.00 Port * Comm Select port for 3rd Transmit.
P231.01 Print
P232.00 Mot'n off Enable/disable motion delay
for 3rd Transmit.
P232.01 * delay