Windsor 500 User Manual - Issue C
User Authority
The Windsor System can be programmed to accept up to 50 authorised users. The first three user numbers
are pre-allocated as follows:
User 0 System User (Automatic functions)
User 1 Engineer
User 2 Manager Authority all areas
Note: User ’0’ is not included in the total number of users.
The remaining 49 users numbers (2 - 50) can be allocated to other users of the system.
Note: If a user number is not allocated an authority level, it is automatically assumed to have 'No Authority”.
The authority level allocated to the user number determines the user functions to which they are permitted
access. In addition, the allocated authority can be restricted to specific areas of the system, (e.g., User 22
may be allocated 'Set Only' authority for area 1 and 3 only, thereby prohibiting the user from unsetting the
whole system, or from setting areas 2, 4, 5, 6 or 7 if programmed).
A user with the authority of 'Manager' can perform all user functions including adding or removing a user or
changing the authority of other users. However, 'Manager' authority may also be restricted to specific areas.
User Type User Authority
None No access permitted.
Manager All user functions for programmed areas.
Ordinary All user functions for programmed areas, except viewing/printing the event log, isolating a
Keypad, changing user authority and changing other user PIN numbers.
Set/Unset Set, unset, logging the engineer on and test functions for programmed areas and
view/print area log(s).
Set Only Set, logging the engineer on and test only for programmed areas.
Reset Authority to carry out Customer Engineer Reset (if programmed) in authorised areas.
Duress Special PIN code available to all users and used in the event of a demand to unset the
system or area under duress. Use of this PIN code will unset the areas(s), but will transmit
a 'silent' personal attack message to the alarm company central station. Incrementing or
decrementing (optional) the first digit of the any PIN code will have the same effect.
Bank Reset Special PIN code that performs Bank reset, view area log, bypass and perform reset (only
HS Version).
ATM Special PIN code that performs ATM bypass when logged on (HS version only).
Event Log Can only view the event log.
Cleaner Set and Unset only.
Unset Unset only.
Access A user with Access user type authority has no authority for any menu function. The only
action on entry of an Access user PIN code is to trigger an output to unlock a door.
Technical Manuals Online! - http://www.tech-man.comTechnical Manuals Online! - http://www.tech-man.com
To Next Page
