Windsor 500 User Manual - Issue C
Programming Electronic Keys
A user with ’Manager’ authority can add Electronic Keys to replace the user PIN code allocated. This option
is only available at a Keypad with an LCD display. All Electronic Key allocations are recorded in the system
event log as PIN changes. To programme an Electronic Key, proceed as follows:
2=Set 4=Test
5=Eng 6=Text.....
1. .Log on to any Keypad using a ’Manager’ PIN code.
2. Press ’Enter’ to move the display to page 2 of the user options menu.
1=Chime 2=KPOff
3=Event Log......
3. Press ▼ to view the remaining page 2 user options.
4=User
5=Time 6=Keys
4. Select 6 from the user options menu
User Number--
5. The display will prompt for the user number.
User - 04
Insert Key
6. Enter a two-digit user number (02-50). The display will then prompt for the
Electronic Key to be inserted.
Key OK
7. Insert the Electronic Key to be allocated to the user into the socket
Key FAIL
8. If the Electronic Key is read correctly the display will show ’Key OK’. If not, the
display will show ‘Key Fail'.
User Number--
9. The display will prompt for the next user number.
10. Repeat for other users, if applicable, or press 'Quit' to return to the user options
menu.
6=Keys
↵ = Next Page
↵
▼
6
Quit
Technical Manuals Online! - http://www.tech-man.comTechnical Manuals Online! - http://www.tech-man.com
To Next Page
Loading...
