Windsor 500 User Manual - Issue C
Disabling a Keypad
A ‘Manager’' user can disable a Keypad in an authorised area if required, providing the area is unset.
Disabling a Keypad will render all buttons on the Keypad inoperative, however the Keypad display will
continue to operate normally. To disable a Keypad, proceed as follows:
2=Set 4=Test
5=Eng 6=Text.....
1. Log on using a 'Manager' PIN code at the Keypad to be disabled, or any other
authorised Keypad.
2. Press 'Enter' to move the display to page 2 of the user options
1=Chime 2=KPOff
3=Event Log
3. Select 2 from the user options
Keypad Number
4.. The display will prompt for the Keypad number to be disabled. Enter a one-digit
Keypad number(l to 8).
Keypad 1
On
5. The display will show the current status of the selected Keypad, e.g., 'On'
6. Press '1' to turn the Keypad 'On' or ‘0' to turn the Keypad 'Off'.
Keypad 1
Off
7. Press 'Quit' to register the status . (Pressing 'Quit' without changing the status will
keep the current status).
Keypad Number
8. The display will prompt for another Keypad number.
9. Enter another Keypad number to be disabled/enabled, or press 'Quit' to return to the
User Options Menu
2=KP Off
3=Event Log
↵
2
1
0
Quit
Quit
Technical Manuals Online! - http://www.tech-man.comTechnical Manuals Online! - http://www.tech-man.com
To Next Page
Loading...
