Windsor 500 User Manual - Issue C
Remote Operation
7=EvProg
8=Remote
The Windsor system can be controlled from a local or remote personal computer. To
’log on’ to the system from a computer the Engineering communicator must be
programmed by the installation engineer for the required remote functions. All
Keypads will display ‘Out of Service' until the 'Remote User' logs off.
Select ‘Remote’ to allow the off-site engineer access to the panel.
Out of Service
This operation will only be required if Windsor has been configured for manual remote
access.
Technical Manuals Online! - http://www.tech-man.comTechnical Manuals Online! - http://www.tech-man.com
To Next Page
Loading...
