Windsor 500 User Manual - Issue C
Keypoints
Status LEDs
MAINS
READY
DAY
MESSAGE
SET UNSET
Set and Unset backlit
buttons
Electronic key socket
Keypoints can be fitted instead of any of the 8 (maximum) Keypads. Each Keypoint can be programmed to
permit setting/unsetting of only one selected area or the complete system.
Keypoint LEDs
When a stand-alone Keypoint is fitted, a series of ’Status’ LEDs are also provided to inform the operator of
the system status at any one time. These are identical to the LED’s on the LCD Keypad.
Keyswitch
As an alternative method of setting and unsetting, a simple 'On' 'Off Keyswitch may be fitted to the system.
Electronic Keys
Up to 49 Electronic Keys can be used with Windsor. Each key is used instead of a user PIN code. Electronic
Keys replace a user's PIN code and have the same authority.
Note: Only one Electronic Key per user is allowed.
Dual PIN Operation
Where a higher level of security is required a Keypad or Keypoint may have been programmed to require
either two PIN codes, two Electronic Keys, or an Electronic Key and PIN code to be entered within a 2-minute
time window, before the user is logged on to the system.
Technical Manuals Online! - http://www.tech-man.comTechnical Manuals Online! - http://www.tech-man.com
To Next Page
