Windsor 500 User Manual - Issue C
Event Log and Area Log Messages
Event log and Area log messages
Log Text Additional Data Display Text Event Description
Alarm Circuit nnn Cctnnn A Circuit alarm
Auto Check Fail Circuit nnn Cctnnn A Circuit has failed to
activate during the auto
check period.
AV60 Tamper NONE NONE Tamper on an AV60
input channel.
Battery Low NONE NONE The battery has reached
the low volts threshold
(after a mains fail)
Conc. Tamper n n Concentrator Tamper
Entry Alarm Area n An The area is not unset
before the end of the
entry warning period
EVP Shunt Fault (HS only) Circuit nnn Cctnnn The circuit is in alarm
when the event
programmer removes the
shunt
Fire Circuit nnn Cctnnn A fire type circuit alarm
Panel Tamper NONE NONE Panel case or off the
wall tamper
Personal Attack Circuit nnn Cctnnn A PA type circuit alarm
Rmt. Auth Fail NONE NONE Repeated attempt to log
on by a remote host
Sounder Tamper NONE NONE External sounder tamper
Tamper Circuit nnn Cctnnn A circuit tamper
Tamper Keypad n KPn A keypad tamper
Event log only messages
230v Failed NONE NONE Mains supply failed
230v Restored NONE NONE Mains supply restored
Active Cct.Test Circuit nnn Cctnnn User selected active
circuit test
Alarm (master shunt) Circuit nnn Cctnnn Master shunt type circuit
alarms
Alarm Abort User nn, Keypad n Usnn, KPn Alarm abort signal
transmitted.
All Ccts Tested User nn, n Usnn, KPn All circuit(s) tested,
where n=1 for PA; n=2
for Walk, n=3 for 24hr
and n=4 for detector.
Audio Untested User nn, Area n Usnn, An User exits test without
testing the audio output
Auto Set User nn, Area n Usnn, An Event programmer
automatically set area
Auto Set & Fault User nn, Area n Usnn, An Event programmer
automatically set area
with circuit(s) in alarm
Auto Unset User nn, Area n Usnn, An Event programmer
automatically unset area
AV60 Mute NONE NONE CS connection to AV60
has requested a
sounders mute.
Technical Manuals Online! - http://www.tech-man.comTechnical Manuals Online! - http://www.tech-man.com
To Next Page
Loading...
