Windsor 500 User Manual - Issue C
programmed 'Late Working' time. The ‘Late Working' LED will be illuminated until the area is manually or
automatically set.
4. If an extension facility is programmed, the user may extend the automatic setting time by the pre-
programmed 'Extension Time' beyond the normal (or late working) time, by entering an authorised PIN
code or key at an area Keypad (or an authorised electronic key at an area Keypoint) during the warning
period. The ‘Extension time' may be requested repeatedly up to midnight of the current day.
Note 1: A 'Manager' user can select scheduled 'Late Working' at any time during the day up to the scheduled
normal setting time.
Note 2: A Manager user is required to view the event programmer settings and to modify the 'Late Working'
days.
Note 3: If faults exist during setting and the system is programmed to permit automatic setting with faults the
system will set with the faulty circuits temporarily bypassed. If not programmed to permit setting with faults,
the system will not set and an 'Auto Set Fail' signal is automatically transmitted to the communication centre
via the system communicator.
Note 4: An authorised user may set the area(s) before the set time, working late time or during any
“Extension" duration by entering an authorised user code and setting the area(s) in the normal way.
Technical Manuals Online! - http://www.tech-man.comTechnical Manuals Online! - http://www.tech-man.com
To Next Page
Loading...
