Windsor 500 User Manual - Issue C
J Smith
↵ = Change PIN
6. The display will show the text descriptor for the selected user and give the Manager’
the option of changing the PIN code. Press ’Enter’ to change the user’s PIN code
New PIN
Enter-
7. The display will prompt for a new PIN code. Enter new PIN code or insert their
Electronic Key.
Note: If the PIN code selected is already in use, the display will show that the selected
code is not available. Re-enter another PIN code. See also ’PIN Code Clash.
Re-Enter PIN
Enter-
8. The display will prompt for the new code to be re-entered. Re-enter new PIN code
or re-insert their Electronic Key.
Note: If the re-entered PIN code is not the same as the original new code entered, the
display will show that the codes do not match. Enter the new PIN code again
User Number-
9. Press ’Enter’ to register new PIN code. The display will prompt for another user
number.
2=User PIN
9. Change another user PIN code or press ’Quit’ to return to the ’User Options Menu’.
7=Light 8=PIN
↵ = Next Page
Using this method a Manager user can change the PINs of all users, or add additional
Electronic Keys as required.
↵
↵
Quit
Technical Manuals Online! - http://www.tech-man.comTechnical Manuals Online! - http://www.tech-man.com
To Next Page
Loading...
