GW Instek PSU Series Programming Manual

PSU Series Programming Manual
100
MIN
Minimum falling current slew rate is
0.001A/msec.
MAX
Maximum falling current slew rate is
rated current divided by 100msec.
Return Parameter
<NR2>
Returns the step current
Example
SOUR:CURR:SLEW:FALL MAX
Sets the falling current slew rate to the maximum.
[:SOURce]:MODE?
Set
Query
Description
Returns the status of the output mode (CC, CV,
Off) of the power supply.
The interface will return “CV’ if the supply is in
Constant Voltage Mode, “CC” if the supply is in
Constant Current Mode or “OFF” if the supply
output is off.
Query Syntax
[:SOURce]:MODE?
Return parameter
<string>
Returns the output state as a string, “CC”,
“CV”, “OFF”
Example
:SOUR:MODE?
>CC
The power supply is currently in CC mode.
[:SOURce]:RESistance[:LEVel][:IMMediate]
[:AMPLitude]
Set
Query
Description
Sets or queries the internal resistance in ohms.
Syntax
[:SOURce]:RESistance[:LEVel][:IMMediate][:AMPLitud
e] {<NR2>(OHM)|MINimum|MAXimum}
Query Syntax
[:SOURce]:RESistance[:LEVel][:IMMediate][:AMPLitud
e]?
Parameter
<NR2>
Resistance in ohms:
0 ohm ~ Rrated = Vrated/Irated

GW Instek PSU Series Specifications

General

Brand	GW Instek
Model	PSU Series
Category	Power Supply
Language	English