GW Instek PSU Series - Operating PSUs in Master-Slave Parallel Mode

REMOTE CONTROL
75
Abort Commands
:ABORt ................................................................................... 75
:ABORt
Set
Description
The :ABORt command will cancel any triggered
actions.
Syntax
:ABORt
Apply Commands
:APPLy .................................................................................... 75
:APPLy
Set
Query
Description
The apply command sets the voltage and current
at the same time.
Syntax
Query Syntax
:APPLy
{<NRf>(V)|MINimum|MAXimum[,<NRf>(A)|MINimu
m|MAXimum]}
:APPLy?
Parameter/
Return parameter
<NRf>(V)
Voltage setting.
MINimum
Minimum voltage level
MAXimum
Maximum voltage level
<NRf>(A)
Current setting.
MINimum
Minimum voltage level
MAXimum
Maximum voltage level
Example
APPL MIN, MIN
Sets the current and voltage to the minimum
settings.