REMOTE CONTROL
63
Socket Server Function Check
To test the socket server functionality, National
Instruments Measurement and Automation
Explorer can be used. This program is available on
the NI website, www.ni.com., via a search for the
VISA Run-time Engine page, or “downloads” at
the following URL, http://www.ni.com/visa/
Operating System: Windows XP, 7, 8
1. Start the NI Measurement and Automation
Explorer (MAX) program. Using Windows,
press:
Start>All Programs>National
Instruments>Measurement & Automation
2. From the Configuration panel access;
My System>Devices and Interfaces>Network
Devices
3. Press Add New Network Device>Visa TCP/IP
Resource…
To Next Page
Loading...
Need help?
General
