GW Instek PSU Series - Operating PSUs in Series Mode

PSU Series Programming Manual
82
Measure Commands
:MEASure[:SCALar]:ALL[:DC] .......................................... 82
:MEASure[:SCALar]:CURRent[:DC] ................................ 82
:MEASure[:SCALar]:VOLTage[:DC] ................................ 82
:MEASure[:SCALar]:POWer[:DC] .................................... 83
:MEASure[:SCALar]:ALL[:DC]
Query
Description
Takes a measurement and returns the average
output current and voltage
Syntax
:MEASure[:SCALar]:ALL[:DC]?
Return parameter
"+0.0000,+0.0000"
<voltage>,<current>
Returns the voltage (V) and
current (A), respectively.
:MEASure[:SCALar]:CURRent[:DC]
Query
Description
Takes a measurement and returns the average
output current
Syntax
:MEASure[:SCALar]:CURRent[:DC]?
Return parameter
“+0.0000”
Returns the current in amps.
:MEASure[:SCALar]:VOLTage[:DC]
Query
Description
Takes a measurement and returns the average
output voltage.
Syntax
:MEASure[:SCALar]:VOLTage[:DC]?
Return
“+0.0000”
Returns the voltage in volts.