GW Instek PSU Series Programming Manual

REMOTE CONTROL
119
Parameter/Return
<NR1>
0~30
Example
SYST:COMM:GPIB:SELF:ADDR 15
SYST:REB
Sets the GPIB address to 15 and reboot the unit to
active the setting.
:SYSTem:COMMunicate:LAN:IPADdress
Set
Query
Description
Sets or queries LAN IP address.
Note
The setting will only be valid after the power has been
cycled.
Syntax
Query Syntax
:SYSTem:COMMunicate:LAN:IPADdress <string>
:SYSTem:COMMunicate:LAN:IPADdress?
Parameter/Return
<string>
LAN IP address in string format
(“address”)
Applicable ASCII characters: 20H to 7EH
Example
SYST:COMM:LAN:IPAD “172.16.5.111”
SYST:REB
Sets the IP address to 172.16.5.111 and reboot the
unit to active the setting.
:SYSTem:COMMunicate:LAN:GATeway
Set
Query
Description
Sets or queries the Gateway address.
Note
The setting will only be valid after the power has been
cycled.
Syntax
Query Syntax
:SYSTem:COMMunicate:LAN:GATeway <string>
:SYSTem:COMMunicate:LAN:GATeway?
Parameter/Return
<string>
Gateway address in string format
(“address”)
Applicable ASCII characters: 20H to 7EH

GW Instek PSU Series Specifications

General

Brand	GW Instek
Model	PSU Series
Category	Power Supply
Language	English