GW Instek PSU Series Programming Manual

REMOTE CONTROL
107
:SYSTem:COMMunicate:USB:REAR:STATe ............... 127
:SYSTem:ERRor ................................................................. 127
:SYSTem:KLOCk ............................................................... 127
:SYSTem:KEYLock:MODE ............................................ 128
:SYSTem:ERRor:ENABle ................................................. 128
:SYSTem:LANGuage:EMULation .................................. 128
:SYSTem:LANGuage:[:SELect] ....................................... 128
:SYSTem:PRESet ................................................................ 129
:SYSTem:VERSion ............................................................. 129
:SYSTem:REBoot ............................................................... 129
:SYSTem:BEEPer[:IMMediate]
Set
Query
Description
This command causes an audible tone to be
generated by the instrument. The duration time is
specified in seconds.
Syntax
Query Syntax
:SYSTem:BEEPer[:IMMediate]
{<NR1>|MINimum|MAXimum}
:SYSTem:BEEPer[:IMMediate]?
[MINimum|MAXimum]
Parameter
<NR1>
0 ~ 3600 seconds.
MINimum
Sets the beeper time to the minimum
(0 seconds)
MAXimum
Sets the beeper time to the maximum
(3600 seconds)
Return parameter
<NR1>
Returns the remaining beeper
duration time in seconds or returns
the maximum or minimum beeper
time in seconds (for the
[MINimum|MAXimum] query
parameters).

GW Instek PSU Series Specifications

General

Brand	GW Instek
Model	PSU Series
Category	Power Supply
Language	English