GW Instek PSU Series - External Operation and Status Monitoring

REMOTE CONTROL
137
*SRE
Set
Query
Description
Sets or queries the Service Request Enable register.
The Service Request Enable register determines
which registers of the Status Byte register are able
to generate service requests.
Syntax
Query Syntax
*SRE <NR1>
*SRE?
Parameter
<NR1>
0~255
Return parameter
<NR1>
Returns the bit sum of the Service
Request Enable register.
*STB
Query
Description
Queries the bit sum of the Status Byte register
with MSS (Master summary Status) replacing the
RQS bit (bit 6).
Query Syntax
*STB?
Return parameter
<NR1>
Returns the bit sum of the Status Byte
register with the MSS bit (bit 6).
*TRG
Set
Description
The *TRG command is able to generate a “get”
(Group Execute Trigger). If the PSU cannot accept
a trigger at the time of the command, an error
message is generated (-211, “Trigger ignored”).
Syntax
*TRG
*TST
Query
Description
Executes a self test.
Query Syntax
*TST?