GW Instek PSU Series Programming Manual

PSU Series Programming Manual
132
Global Commands
:GLOBal:CURRent[:LEVel][:IMMediate]
[:AMPLitude] ....................................................................... 132
:GLOBal:VOLTage[:LEVel][:IMMediate]
[:AMPLitude] ....................................................................... 132
:GLOBal:OUTPut[:STATe][:IMMediate] ....................... 133
:GLOBal:PRESet ................................................................ 133
:GLOBal:CURRent[:LEVel][:IMMediate]
[:AMPLitude]
Set
Description
Sets current value for all units when using the
(Legacy) Multi-Drop mode.
Syntax
GLOBal:CURRent[:LEVel][:IMMediate][:AMPLitude]
{<NR2>(A)|MINimum|MAXimum}
Parameter
<NR2>
0~105% of the rated current output level.
MIN
Minimum current level.
MAX
Maximum current level.
Example
GLOB:CURR MAX
Sets the current to the maximum for all units.
:GLOBal:VOLTage[:LEVel][:IMMediate]
[:AMPLitude]
Set
Description
Sets voltage value for all units when using the
(Legacy) Multi-Drop mode.
Syntax
:GLOBal:VOLTage[:LEVel][:IMMediate][:AMPLitude]
{<NR2>(V)|MINimum|MAXimum}
Parameter
<NR2>
0~105% of the rated voltage output level
MIN
Minimum voltage level.
MAX
Maximum voltage level.

GW Instek PSU Series Specifications

General

Brand	GW Instek
Model	PSU Series
Category	Power Supply
Language	English