GW Instek PSU Series Programming Manual

REMOTE CONTROL
155
-141 Invalid
character data
Either the character data element contains an
invalid character or the particular element received
is not valid for the header.
-148 Character
data not allowed
A legal character data element was encountered
where prohibited by the device.
-151 Invalid string
data
A string data element was expected, but was
invalid for some reason (see IEEE 488.2, 7.7.5.2); for
example, an END message was received before the
terminal quote character.
-158 String data
not allowed
A string data element was encountered but was
not allowed by the device at this point in parsing.
-160 Block data
error
This error, as well as errors -161 through -169, are
generated when parsing a block data element. This
particular error message should be used if the
device cannot detect a more specific error.
-161 Invalid block
data
A block data element was expected, but was
invalid for some reason (see IEEE 488.2, 7.7.6.2); for
example, an END message was received before the
length was satisfied.
-168 Block data
not allowed
A legal block data element was encountered but
was not allowed by the device at this point in
parsing.
-178 Expression
data not allowed
A legal expression data was encountered but was
not allowed by the device at this point in parsing.

GW Instek PSU Series Specifications

General

Brand	GW Instek
Model	PSU Series
Category	Power Supply
Language	English