GW Instek PSU Series Programming Manual

PSU Series Programming Manual
66
11
12
13. Click the Configuration icon,
14. Click on I/O Settings.
15. Make sure the Enable Termination Character
check box is checked, and the terminal
character is \n (Value: xA).
16. Click Apply Changes.
14
13
15
16
17. Click the Input/Output icon.
18. Enter *IDN? in the Select or Enter Command
dialog box if it is not already.
19. Click the Query button.

GW Instek PSU Series Specifications

General

Brand	GW Instek
Model	PSU Series
Category	Power Supply
Language	English