106
[DeviceC] interface tunnel 0
[DeviceC-Tunnel0] service-loopback-group 1
[DeviceC-Tunnel0] quit
# Configure two static routes.
[DeviceC] ip route-static 10.1.1.0 255.255.255.0 30.1.1.1
[DeviceC] ip route-static 20.1.1.0 255.255.255.0 30.1.1.1
# Create local mirroring group 1.
[DeviceC] mirroring-group 1 local
# Configure Ethernet 1/0/1 as a source port and Ethernet 1/0/2 as the monitor port of local mirroring
group 1.
[DeviceC] mirroring-group 1 mirroring-port Ethernet 1/0/1 inbound
[DeviceC] mirroring-group 1 monitor-port Ethernet 1/0/2
# Disable the spanning tree feature on the monitor port Ethernet 1/0/2.
[DeviceC] interface Ethernet 1/0/2
[DeviceC-Ethernet1/0/2] undo stp enable
[DeviceC-Ethernet1/0/2] quit
5. Verify the configurations
After the configurations are completed, you can monitor all the packets received and sent by the
marketing department on the server.
To Next Page
Loading...
Need help?
General
