Increase burst period,
repetition Frequency
Too many spikes per packet
Decrease Burst duration, Rep.
Frequency, Increase Burst
period
Incompatible settings for pre-compliance
mode
Burst mode must be set to
Normal, Trigger must be set to
Auto, Transition must be set
off
Decrease peak voltage,
increase repetition rate
Decrease field strength,
increase repetition rate
Decrease dip duration or
increase dip interval
Entered value out of range
Value must be in the range of
min. and max. value Note:
Similar error can occur, only
with different units, however,
similar
action for solving
To Next Page
Loading...