3
7. PLC2Way 3-49
Serial Communications
System Memory
The status of the PLC connected at the MJ port for PLC2Way communications is output to
the system memory ($s) of the V7 series. The memory addresses ($s730 to 763) of the
PLC connected at the MJ port are explained.
List
Address Contents
•
•
•
•
•
•
$s730 Temperature controller/PLC2Way Station No. 00 status
731 Temperature controller/PLC2Way Station No. 01 status
732 Temperature controller/PLC2Way Station No. 02 status
733 Temperature controller/PLC2Way Station No. 03 status
734 Temperature controller/PLC2Way Station No. 04 status
735 Temperature controller/PLC2Way Station No. 05 status
736 Temperature controller/PLC2Way Station No. 06 status
737 Temperature controller/PLC2Way Station No. 07 status
738 Temperature controller/PLC2Way Station No. 08 status
739 Temperature controller/PLC2Way Station No. 09 status
740 Temperature controller/PLC2Way Station No. 10 status
741 Temperature controller/PLC2Way Station No. 11 status
742 Temperature controller/PLC2Way Station No. 12 status
743 Temperature controller/PLC2Way Station No. 13 status
744 Temperature controller/PLC2Way Station No. 14 status
745 Temperature controller/PLC2Way Station No. 15 status
746 Temperature controller/PLC2Way Station No. 16 status
747 Temperature controller/PLC2Way Station No. 17 status
748 Temperature controller/PLC2Way Station No. 18 status
749 Temperature controller/PLC2Way Station No. 19 status
750 Temperature controller/PLC2Way Station No. 20 status
751 Temperature controller/PLC2Way Station No. 21 status
752 Temperature controller/PLC2Way Station No. 22 status
753 Temperature controller/PLC2Way Station No. 23 status
754 Temperature controller/PLC2Way Station No. 24 status
755 Temperature controller/PLC2Way Station No. 25 status
756 Temperature controller/PLC2Way Station No. 26 status
757 Temperature controller/PLC2Way Station No. 27 status
758 Temperature controller/PLC2Way Station No. 28 status
759 Temperature controller/PLC2Way Station No. 29 status
760 Temperature controller/PLC2Way Station No. 30 status
761 Temperature controller/PLC2Way Station No. 31 status
762 Other than “0”: periodical reading suspended
763 Other than “0”: temperature control network/PLC2Way transfer macro forced execution
To Next Page
Loading...
