Hakko Electronics Monitouch V7 - Modular Jack; [Editor Port] *1; [Ladder Tool] *9; [Printer (Serial Port)] *11

1
12. Modular Jack (MJ1/MJ2) 1-31
Hardware Specifications
3. Do not select [Multi-link] and [Temp. CTRL/PLC2Way] for [Modular Jack 1/2] at the
same time.
• Combination of MJ1 and MJ2 Functions
O: Usable at the same time, : Usable from system program Ver. 1.010, ×: Not usable at the same time
Supplemental Remark: Multi-link communication and temperature control network/PLC2Way
can be used at the same time.
• Combination of Communication Unit (CU-xx) and Modular Jack Function
O: Usable at the same time, ×: Not usable at the same time
*1 This is not possible when the V7 series and the PLC are connected via Ethernet.
MJ1
MJ2
Multi-
Link 2
CREC Barcode V-I/O
Tem p.
CTRL/PLC
2Way
V-Link
Touch
Switch
Ladder
Tool
Printer
(Serial Port)
Multi-
Link 2
OOO OO× O
CREC O OOOOOOO
BarcodeOO OOOOOO
V-I/O OOO OOOOO
Temp.
CTRL/PLC
2Way
OOO OOOO
V-Link OOOOO OOO
Touch
Switch
OOOOOO OO
Ladder
Tool
× OOOOOO O
Printer
(Serial Port)
OOOOOOOO
MJ
Communication Unit
Multi-Link
2
CREC Barcode V-I/O
Temp.
CTRL/PL
C2Way
V-Link
Touch
Switch
Ladder
Tool
Printer
(Serial
Port)
Built-in
Ethernet
CU-00 OPCN-1 × OOOOOOOOO
CU-01 T-LINK × OOOOOOOOO
CU-02 CC-Link × OOOOOOOOO
CU-03 Ethernet (FL-net)
*1
OOOOOOOO×
CU-04 PROFIBUS-DP × OOOOOOOOO
CU-05 MELSECNET/10 × OOOOOOOOO