Hakko Electronics Monitouch V7 - Available Memory

5
12. GE Fanuc PLC 5-83
Connection to PLCs
Available Memory
The available memory setting range varies depending on the PLC model. Be sure to set within the
range available with the PLC to be used. Use [TYPE] when assigning the indirect memory for macro
programs.
90 Series
90 Series SNP-X
Memory TYPE Remarks
R (data register) 0
I (input) 1
Q (output) 2
Memory TYPE Remarks
R (data register) 0
I (input) 1
Q (output) 2
M (internal relay) 3
G (global relay) 4
AI (analog input) 5
AQ (analog output) 6
T (temporary memory relay) 7
S (system status) 8 Read only
SA (system status) 9
SB (system status) 10
SC (system status) 11