Hakko Electronics Monitouch V7 - Clock and Backup Memory Specifications; Function Switch Specifications; Interface Specifications

1
4. Specifications 1-11
Hardware Specifications
Function Switch Specifications
Interface Specifications
*1 The CBM292/293 printer cannot print screen hard copies.
Clock and Backup Memory Specifications
Item Specifications
Number of Switches 8
Method Pressure sensitive
Mechanical Life One million activations or more
Item Specifications
Serial Interface for PLC
Connection
(D-sub 25-pin, female)
RS-232C, RS-422/485
Asynchronous type
Data length: 7, 8 bits
Parity: even, odd, none
Stop bit: 1, 2 bits
Baud rate: 4800, 9600, 19200, 38400, 57600, 76800, 115 kbps
Serial Interface 1, 2 for Screen
Data Transfer/External
Connection
(Modular jack, 8-pin)
RS-232C, RS-422/485 (2-wire connection)
CREC, Barcode, V-I/O, Multi-link 2,
Temperature control network/PLC2Way, V-link, etc.
Printer Interface for Printer
Connection
Compliant with Centronics, half-pitch 36-pin
NEC: PR201
EPSON: ESC/P-J84, ESC/P super function, ESC/P24-J84
CBM292/293 printer
*1
, HP PCL Level 3
Barcode printer MR400
CF Card Interface Compliant with CompactFlash
TM
10BASE-T for Ethernet
Connection
(Standard with V7i)
Compliant with IEEE802.3
Baud rate: 10 Mbps
Cables: 100 Ω unshielded twist-pair,
Category 5, maximum length = 100 m
Item Specifications
Battery Specification Coin-type lithium primary cell
Battery type: Sanyo CR2450-CN21
Backup Memory SRAM 64 kbyte
Backup Time Period 5 years (ambient temperature at 25°C)
Battery Voltage Drop Detection Provided (internal memory allocated)
Calendar Accuracy Monthly deviation ±90 sec (ambient temperature at 25°C)