EB+ Gen3 Installation guide
2 Innovative Vehicle Solutions 2013
Notes on the use of this manual
This manual has been designed to assist personnel
in satisfactory installation of Haldex EB+ Gen3 onto
full, semi and centre axle trailers. The intention has
been to illustrate various aspects of the installation. It
is expected that this manual will be in possession of
the appropriate person throughout their ‘training’ and
‘experience’ and that the manual will be used as:
a) A teaching aid following supervision of a Haldex
engineer.
b) A reminder of the correct procedure of Haldex
EB+ Gen3 installation.
› Use appropriate spare-parts documentation when
obtaining spare parts
› Use only genuine Haldex parts in repairs
› Due to continuous development the right is reserved
to alter the specification without notice
› No legal rights can be derived from the contents of
the manual
› Duplication, translation and reprinting are prohibited
without permission from Haldex Brake Products
For any other deviation consult
Haldex Brake Products Ltd.
Moons Moat Drive
Moons Moat North
Redditch
Worcestershire
B98 9HA
Tel: +44 1527 499 499
Fax: +44 1527 499 500
E-Mail: eng.bcbu@haldex.com
To Next Page
Loading...
