Chapter 6 Audio Configuration
© 2013 Harmonic Inc. Harmonic All rights reserved. 147 Ellipse 3000 Release 3.0, Rev. B
Channel Parameters Menu
6.3.1 Activation
The Activation parameter sets the activation mode of the audio channel.
The available options are:
■ Disabled – Audio channel is disabled.
■ Enabled – Audio channel is enabled and active.
The Activation default value for the first channel is Enabled. The other channels are disabled by
default.
Front Panel
To set the Activation parameter on the front panel:
❖ Navigate
Root > Configuration > Audio > [Audio Channel#] > Channel Parameters > Activation.
Web Manager
To set the Activation parameter in the Web Manager Channel Parameters menu:
❖ Select Audio > Aud#.
Activation
1 ‚ Disabled
2 ƒ Enabled
To Next Page
Loading...
