Harmonic Ellipse 3000 - Add Entry Menu (Front Panel)

Chapter 10 Unit Configuration
© 2013 Harmonic Inc. Harmonic All rights reserved. 286 Ellipse 3000 Release 3.0, Rev. B
SNMP Traps Sub-Menu
10.4.1.4 Community
The Community parameter sets the trap-host community definition. Community is an optional
parameter and is used as a security precaution, allowing access to a user of the same community
string.
The available value is a string of up to 255 characters and digits.
Front Panel
To set the Community parameter on the front panel:
❖ Navigate Root > Configuration > Unit > SNMP Traps > Traps Destinations List > [Trap
Name] > Community.
Web Manager
To set the Community parameter in the Web Manager:
❖ Select
Unit > SNMP Traps > [trap entry].
10.4.2 Add Entry Menu (front panel)
The Add Entry menu allows adding new entries (trap hosts), to the Traps Destinations list. The
menu allows defining a new host by an IP address and adding it to the list.
To access the Add Entry menu on the front panel:
❖ Navigate Root > Configuration > Unit > SNMP Traps > Add Entry.
Community
public
Add Entry
1 Destination IP
010.251.251.010
2 Add