© 2013 Harmonic Inc. Harmonic All rights reserved. 38 Ellipse 3000 Release 3.0, Rev. B
Chapter 3
Ellipse Management
The Ellipse front panel interface provides access to all encoder control parameters, while the
Ellipse Web Manager interface allows easy access to the same parameters from a remote
computer. Therefore, these two interfaces are intertwined in the description provided by this
manual.
Each interface is menu structured in a root up tree structure, described in the following
paragraphs and detailed in the following chapters.
Topics:
■ Ellipse Management Interfaces
■ Ellipse Management Menu Tree
■ Preset Menu
■ Front Panel Configuration Menu
■ Status Menu/Tab
3.1 Ellipse Management Interfaces
The Ellipse Series of Contribution Encoders offers the two management interfaces to the Ellipse
operator:
■ Front panel interface for local management (see 3.1.1 Ellipse Front Panel Control Interface)
■ Web Manager interface for remote management (see 3.1.2 Ellipse Web Management Control
Interface)
3.1.1 Ellipse Front Panel Control Interface
The front panel of the Ellipse provides extensive local control abilities along with convenient
monitoring of statuses and operations.
The section is divided as follows:
■ Front Panel Controls and Displays – Details the front panel touchpad keys and their functions.
■ Front Panel Screen Types – Details the LCD screen’s different displays.
■ The Ellipse front panel features lockup and sleep modes:
❑ Front panel Lockup Mode enables locking the encoder from unintentional activation of the
front panel.
❑ Backup Light Sleep Mode enables power saving when the encoder is not locally operated.
To Next Page
Loading...
