Harmonic Ellipse 3000 - Chapter 10: Unit Configuration

To Next Page

To Previous Page

Chapter 10

Unit Configuration

This chapter details the Ellipse Series of Contribution Encoders unit configuration menus and

parameters.

Topics:

■ General

■ Licensing

■ Ellipse System Sub-Menu/Tab

■ SNMP Traps Sub-Menu

■ Alarm Sub-Menu/Tab

■ Redundancy Sub-Menu/Tab

■ Display Contrast Menu

10.1 General

The Unit Configuration menu allows access to various menus and parameters that allow setting

unit definitions, including: permissions, system definitions, clock setting and version information.

The available menus and options are (see Figure 10–1):

■ Licensing menu – Displays the unit ID and allows entering a permission key

(see 10.2 Licensing).

■ System sub-menu/tab – Allows setting system information and functions

(see 10.3 Ellipse System Sub-Menu/Tab).

■ SNMP Traps menu – Allows defining trap destination hosts for trap messages. Trap message

currently support raised and cancelled alarm notifications (see 10.4 SNMP Traps Sub-Menu).

■ Alarm sub-menu/tab – Displays a list of alarms supported by the Ellipse (see 10.5 Alarm Sub-

Menu/Tab).

■ Redundancy sub-menu/tab – Use to configure device 1:1 hot:warm redundancy

(see 10.6 Redundancy Sub-Menu/Tab).

■ Display Contrast sub-menu – Allows setting the display contrast of the front panel LCD

(see 10.7 Display Contrast Menu).

Other manuals for Harmonic Ellipse 3000