Chapter 9 Input Interface Configuration
© 2013 Harmonic Inc. Harmonic All rights reserved. 249 Ellipse 3000 Release 3.0, Rev. B
IP Input Menu (MPE input)
9.3.1 MPE Menu
The MPE menu allows setting up the MPE parameters.
Front Panel
To access the MPE menu on the front panel:
❖ Navigate Root > Configuration > Inputs > IP Input > MPE.
Web Manager
To access the MPE parameters in the Web Manager:
❖ Select Inputs > IP INPUT > MPE.
9.3.1.1 Activation (MPE IP Input)
The MPE Activation parameter sets the MPE activation mode.
Front Panel
To access the Activation menu on the front panel:
❖ Navigate Root > Configuration > Inputs > IP Input > MPE > Activation.
The available options are:
■ Disabled – Activation is disabled.
■ Enabled –Activation is enabled and active.
The MPE Activation default is Disabled.
Web Manager
To set the MPE state in the Web Manager:
❖ Select Inputs > IP Input > MPE.
MPE
1 Activation
2 PID
3 Rate
Activation
ƒ Disabled
‚ Enabled
To Next Page
Loading...
