Harmonic Ellipse 3000 - Language

Chapter 6 Audio Configuration
© 2013 Harmonic Inc. Harmonic All rights reserved. 149 Ellipse 3000 Release 3.0, Rev. B
Channel Parameters Menu
6.3.3 Language
The Language parameter specifies the language code for the audio channel. The value can be 0 if
no specification is available or it can be defined as the language code number (3 characters)
according to ISO 639-2 standard.
The available values are:
■ 0 – No specific language has been set.
■ XXX – 3 characters represent the language code according to the ISO 639-2 standard.
The Language default is ENG.
Front Panel
To set the Language parameter on the front panel:
❖ Navigate
Root > Configuration > Audio > [Audio Channel] > Channel parameters > Language.
Web Manager
To set the Language parameter in the Web Manager Channel Parameters menu:
❖ Select Audio > Aud#.
Language
ENG