Chapter 3 Ellipse Management
© 2013 Harmonic Inc. Harmonic All rights reserved. 60 Ellipse 3000 Release 3.0, Rev. B
Front Panel Configuration Menu
3.4 Front Panel Configuration Menu
The Front Panel Configuration menu comprises the following sub-menus for configuring all Ellipse
parameters, including: transport stream, video-channels, audio channels, output interfaces, and
unit information (see Figure 3–8):
■ Transport Stream Menu – For transport stream identity, stream tables, and other TS
parameters. See Chapter 4, Transport Stream Configuration.
■ Video Menu – For analog and digital video-channel definitions. See Chapter 5, Video
Configuration.
■ Audio Menu – For audio channel definitions, from general parameters through specific
parameters, relevant to a selected audio coding scheme. See Chapter 6, Audio Configuration.
■ VBI Menu – See Chapter 7, VBI.
■ Output Interface Menu – For the encoder output interface parameters and definitions. See
Chapter 8, Output Interface Configuration.
■ Inputs Menu – For the encoder input interfaces parameters and definitions. See Chapter 9,
Input Interface Configuration.
■ Unit Menu – For definitions such as: permission, identity, format, management ports, version
information, date definitions, and alarm settings. See Chapter 10, Unit Configuration.
The Web Manager does not have a configuration menu. Configuring the encoder parameters are
done from the Ellipse Web Management root page, in which these sub-menus are represented as
tabs. For the Web Management main page, see 3.2.2 Web Manager Main Screen on page 50.
To Next Page
Loading...
